Accepted Final Manuscript Instructions
For those accepted via JIST- or JPI-first, revised papers incorporating changes requested by the editor and the peer-review comments must be submitted by 15 October 2021.
Final manuscripts for conference proceedings, typically 4-6 pages in length, are due either:
- 30 November 2021 for early publication via FastTrack*
OR
- 31 January 2022 for post-conference** publication
* FastTrack papers are published on the IS&T Digital Library prior to the Symposium for access at the event. We recommend this option if you wish to have your paper available and citable as soon as possible.
** Post-symposium, final manuscripts are published within their conference proceedings after all of the manuscripts for the conference have been submitted and accepted.
Final Conference Proceedings Manuscript Directions
- EI Conference Proceedings manuscripts are typically 4-6 pages
- Use the reviewer comments to revise and finalize your final manuscript.
- Check you acceptance e-mail for further details.
- Use the Word or LaTeX template to format your final manuscript. See below.
- Final manuscripts should be print-ready, PDF files. Be sure that all fonts and graphics are embedded and that the page size is LETTER..
- Use the OpenConf system to upload the final manuscript PDF, the manuscript source file (Word or zip containing LaTeX files) and the EI 2021 completed copyright transfer form. (Note the OpenConf system is different than the initial abstract submission system. Details for upload are sent to you via email.)
- Note: IS&T does not edit nor proofread papers. We publish the final version that you provide.
Expand Your Reach: Apply for the Demonstration Session
All EI authors are invited to apply for a Demonstration Session. The Sessions provides authors with an additional opportunity to showcase their work to colleagues and prospective employers/collaborators. Authors should present "material" supplemental to their primary
technical presentation. Materials
presented may include hardware, software, physical items, integrated
systems, etc.
Deadline: 10 December 2021, 09:00 NY time
Contact
Donna Smith [dsmith(@imaging.org] for details.
Accepted Oral Presentation Guidelines
Oral Presenter Preparations
- Presentations, with the exception of keynotes and certain invited talks, will be 20 minutes in length. Talks will be kept to the schedule.
- Speakers will use their own computers, audio and video conferencing enabled, for their presentations.
- Each presenter will be scheduled for an AV training session prior to their presentation session. Please be sure to attend with your presentation and equipment at the ready.
- Attend the AV training session (a calendar evite will be sent) to test your background, lighting, audio, camera, and slide deck to make sure your presentation runs smoothly. During that time you will also meet with your session chair and other support staff, as well as learn how to interact with the conference portal and software interface.
- Practice your presentation for clarity and timing. While you will be giving a LIVE presentation, if you have any technical issues during your talk, we will not alter the schedule nor allow a “re-do”.
- Presentation requirement: Authors presenting and attending, at least one per talk, are required to pay for a conference registration at the appropriate rate (member/non-member/student).
Presentation Lengths (examples)
- Oral: 20 minutes; includes 1 minute for chair introduction; 15-16 minutes for your talk; and 3-4 minutes Q&A
- Invited: 30 minutes; this includes 1 minute for chair introduction; 24-26 minutes for your talk; and 3-5 minutes Q&A
- Keynote: 40 minutes; this includes 1-2 minutes for chair introduction; ~32 minutes for your talk; and 5-7 minutes Q&A
What to do on the Day of your Presentation
- Be online as scheduled during the break before your session begins to do a double check of the AV. The break times are used to call up the speakers in the upcoming session to re-check their AV.
- Report to the online meeting room 5-10 minutes before the session is scheduled to begin.
- The session chair will announce your title, the author(s), affiliation(s), and speaker. If you are a substitute speaker, state your name and the original presenter's name.
- Be aware of your microphone and camera locations and do not turn away from them while you are speaking.
- Please keep the session running on time. Talks will not be given extra time. Prepare accordingly.
- Q&A is permitted only if there is time remaining for your talk. To be fair to the next presenter, do not take any questions if you have used up your allotted time.
Accepted Interactive Presentation Guidelines
Interactive (Poster) Presentations will have a 30-minute interactive presentation time. Check your acceptance email and review the scheduling for your presentation.
Preparing your poster
-
Design your poster to be approximately A0 size (1.9 x .85 meter or 48 x 36 inches) as you would for an in-person event.
- See "Poster Layout Samples". We advise a horizontal/landscape orientation.
- Care should be taken to include information to illustrate key points for discussion.
- Pay particular attention to keeping text to a minimum and using images, graphs, and/or charts to enhance its visual interest.
- Text and figures should be designed to clearly convey the essence of your work.
- Details are best presented in a form that is easy to interpret visually, without requiring a great deal of time spent reading.
- Images, figures, and graphs that illustrate your work are strongly encouraged.
- Each section of your presentation should have a descriptive heading; with the material displayed in a logical sequence.
- Simply formatting pages of your paper from the proceedings into your poster PDF is not acceptable.
- Save the poster as a PDF (with embedded fonts) and upload to the EI portal for authors using the upload file option for POSTER presentation. Be sure to complete the Edit Submission data fields in the EI portal for authors and watch for notices and updates via email.
- NOTE that IS&T will upload and share your poster PDF so that it is available for registered attendee online viewing and commenting. If you cannot allow your poster to be downloaded, please contact [email protected] immediately.
Presenting your poster
- Prepare a short introductory sentence that you can start with to discuss your work with each group of attendees,
- Online poster presenters will access their poster presentation using their own computers, audio and video conferencing enabled, for their presentations. The poster presenter will discuss the poster PDF preloaded into the online poster platform.
- The Interactive Poster Paper Session will be held in Gather. Presenters are expected to be in Gather for the ENTIRE session period to be available to attendees interested in discussing your poster. Your poster will be uploaded to your specific Gather location and available for viewing 24/7 starting on the first day of the symposium.
- Each presenter will be scheduled for an AV training session prior to their presentation date. You will receive an email notifying you of the date of the AV training, which will be scheduled approximately at the same time of day as your presentation. During the training we will check your internet connection, access to Gather, webcam, mic, and explain where you need to stand in the “poster space”.
Templates and Copyright Agreement Forms
Author Obligations
Authors submitting to EI agree to the following
- Submission equals authorization for IS&T to circulate the
submission to conference committee members (or journal reviewers) for
peer-review and/or selection purposes.
- If your work is accepted, you are obligated to register and
present your work at EI as scheduled. Publication is conditional on your
presentation. Register at the required registration rate by the early
registration deadline. At least one full (non-student) registration is
required with each accepted paper or presentation. Authors accepted
under the Journal-first option must register for the conference AND pay
the journal publication charges; reduced rates apply. See journal-first
information for details.
- Obtain funding for their registration fees, travel, and accommodations, independent of IS&T.
- As applicable, secure a visa to travel to the US. Support
letters are provided to accepted authors. We suggest that you choose the
early decision submission option and complete the visa letter request form as soon as you are notified of acceptance.
- Ensure that all clearances (government and company) have been
obtained to present and publish the work. If you are a DoD contractor in
the USA, allow at least 60 days for clearance.
- Sign and submit the IS&T Copyright Agreement. Please note
that accommodations are made for authors who need to sign creative
commons copyright forms such as CC BY and other options.
- Submit a full-length manuscript (typically 4-6 pages) for publication in the IS&T Digital Library by the stated deadlines.
- Attend EI and give a high-quality presentation as scheduled in
the technical program. Prior to the conference, carefully construct and
practice your presentation to faithfully represent your work to other
attendees. Be prepared to answer questions. about the work.
Please note: Commercial papers, papers with
no new research/ development content, and papers where supporting data
or a technical description cannot be given for proprietary reasons will
not be accepted for presentation.