No content found

PRELIMINARY PROGRAM
Note: Program subject to change. Final program will be posted one month before the meeting.

Monday 30 September 2019 ALL TRACKS Opening Remarks and Keynote
9:00 – 10:10

Conquering the Challenges of New Inkjet Markets with MEMS Printhead Technology, Martin Schoeppler, FUJIFILM Dimatix, Inc. (US)

As the world of inkjet printing expands from a focus on graphics into industrial market areas where inkjet printing can bring significantly new value to the manufacturing process, many new printhead challenges become evident during the development of these applications. These challenges are often derived from the fact that many existing printheads were developed initially for graphics applications. Often when using an existing printhead for a new application, significant issues such as fluid compatibility, native drop sizes, productivity, fluid viscosity, and others can become apparent.

FUJIFILM Dimatix has invested significantly in the field of Silicon MEMS technology. This presentation outlines some of the key areas where Silicon MEMS can provide a solid printhead technology backbone for the growth of inkjet into industrial applications and addresses common challenges. The presentation also explores new industrial markets, their needs, and challenges to printhead technology and its usefulness.

Martin Schoeppler joined Spectra in 2004, which became FUJIFILM Dimatix in 2006 with the acquisition by FUJIFILM, and was appointed CEO and president of FUJIFILM Dimatix in 2008. Schoeppler is a seasoned international executive with extensive market experience and more than 30 years of senior management responsibilities at Hewlett-Packard Co., Lumileds Lighting, and Agilent Technologies, Inc. Schoeppler holds a BSEE degree from the University of Applied Science in Esslingen, Germany, and attended INSEAD in France and IMD in Switzerland.

Afternoon Keynote
14:15 - 15:05

Printed Textiles On Demand: Technology Challenges Meet Creative Opportunity, Kerry Maquire King, Spoonflower (US)

Digital printing technology is now enabling product customization and short run production within the textile industry. As a web to print business, Spoonflower illustrates the intersection of e-commerce, digital printing technology, and creative communities. Founded in May 2008, the company specializes in ultra-short run production of textiles, wallpaper, and finished home décor products. The company was conceived as a business that empowers creative individuals to design and print their own fabric. Today visitors to the website are also able to shop an extensive collection of surface designs from independent artists around the globe. Speaking from the vantage point of Spoonflower’s research and development team, King shares insights into the current state of printer hardware solutions and ink chemistry that support this print-on-demand model for textiles. The presentation addresses obstacles and development opportunities related to printing systems, optimization of digital workflow, and color management considerations. She delves into the topic of customer expectations in reference to aesthetic properties and performance requirements for the textile products received and touches on evaluation methods for printed textiles. Additionally, King emphasizes the importance of product visualization and defines some of the technical requirements for supporting a customer-friendly shopping experience.

Kerry Maguire King joined Spoonflower in 2013 and is responsible for project management in areas that include development of strategies for ensuring product quality, technical development of new products, and investigation and implementation of new manufacturing technologies. King also works closely with Spoonflower’s product development and factory teams. Prior to Spoonflower, she spent more than 15 years with [TC]2, a not-for-profit company that specialized in technology development and supply chain improvement within the soft goods industry.

Colleague Connections 
17:35 – 18:30
The Future of Digital Textile Manufacturing
Advances in 3D Printing Technologies
Student/Young Professional Get Together Join others in a night of fun in downtown San Francisco. Details and exact time TBA; sign up when you register to be notified of details. 

TRACK 1
Textile and Nonwovens Printing
10:10 - 15:45

Dye Sublimation Printing with Thermal Inkjet (Focal), Brian Curcio, Raffaella Fior, Hector Lebron, and Alberto Ugaz, HP Inc. (US)

DTG Printers Improve Textile Quality with Innovative Pre-treatment Agent, Masakazu Ohashi, Ryota Miyasa, and Toshihiro Fujie, Seiko Epson Corporation (Japan)

Optimization of Pre-Treatment Solution by Adjusting Thickener’s Property to Fine-Tune Coloring Characteristics on Fabric, Yoshitaka Miyajima, Eri Kuroiwa, Takuya Sonoyama, and Hiroshi Kiguchi, Seiko Epson Corporation (Japan)

Investigation of Reactive Dye Based Ink Fixation Behavior in Digital Printing on Cotton Fabric, Yixin Liu and Lisa P. Chapman, North Carolina State University (US)

Effect of Fabric Hairiness on Quality of the Digital DTG (Focal), Samir Sadikoglu, European Tshirt Factory (Turkey)

JIST-FIRST Replication of Screen-Printing Fabric via Ink-jet Textile Printing, Ming Wang, Lisa Chapman, Marguerite Moore, and Minyoung Suh, North Carolina State University (US)

Development of New Inkjet Ink for Leathers (Interactive Preview), Naoto Shimura, Ricoh Company, Ltd. (Japan)

Development and Validation of Digital Denim Technology and Exploration of Potential Markets (Interactive Preview), Ming Wang, Lisa Chapman, Lori Rothenberg, Minyoung Suh, and Blan Godfrey, North Carolina State University (US)

3D Printing
16:25 - 17:35

Session sponsored by Ricoh. 

3D Printed Electronics with Multi Jet Fusion (Focal), Jarrid Wittkopf, Kris Erickson, and Lihua Zhao, HP Inc. (US)

Application Kaizen for FDM 3D High Temperature (500°C) Hotend, Hideo Taniguchi, KHR Center (Japan), and Jiro Oi, KHR Center (US)

Robotic Ceramic Paste Extrusion for Industrial Prototyping and Production, David Huson, University of the West of England (UK)


TRACK 2
Materials and Material Interactions
10:10 – 12:55

How Carbon’s Digital Light Synthesis is Enabling Digital Manufacturing of Polymeric Products (Focal), Matthew Menyo, Carbon (US)

The Effect of Different Relative Humidity and Temperatures of Coated Paperboards on Inkjet Print Quality, Katriina Mielonen, Sami-Seppo Ovaska, and Ville Leminen, Lappeenranta-Lahti University of Technology (Finland)

Thermal Effects of Contact Angle in Polymeric Powder for 3D Printing, Katrina Donovan, Dragon Materials, James Stasiak, HP Labs, and Willie Rochefort, Oregon State University (US)

Development of Safety and Low Energy Curable Monomer, Masahide Kobayashi, Mitsunobu Morita, Takashi Okada, Takenori Suenaga, and Soh Noguchi, Ricoh Company, Ltd. (Japan)

JIST-FIRST The Optical Properties of the Woodburytype – An Alternative Printing Technique based on a Gelatine/Pigment Matrix, Damien Jon Leech, Walter Guy, and Susanne Klein, University of the West of England (UK)

Engineering Ag Particle Based Inks to Improve Electrical and Sensing Properties of Conductive Composites (Interactive Preview), Mei Chee Tan, Singapore University of Technology and Design (Singapore) The author will be standing by his poster on Oct. 1 (not on Oct.2).

Synthesis of Carbon Dots Ink by Cellulose Nanofiber via Microwave Method (Interactive Preview), Donghao Hu, Kuan-Hsuan Lin, Mikio Kajiyama, and Toshiharu Enomae, University of Tsukuba (Japan)

Transparent CNF/AgNWs Paper Plasticized by Choline Chloride/Urea Solvent for Flexible Electroluminescent Devices (Interactive Preview), Guangxue Chen and Ren'ai Li, South China University of Technology (China)

Printing Biological Materials
15:15 - 15:55

Printable Glycosaminoglycan Graded Gelatin Methacryloyl Acetyl Hydrogels, Kirsten Borchers1, Eva Hoch2, Lisa Rebers2, Sandra Stier1, Veronika Schönhaar1, and Achim Weber1; 1Fraunhofer- Institute for Interfacial Engineering and Biotechnology IGB and 2University of Stuttgart (Germany)

SynJet: A Novel Chemical Dispensing Platform for High-throughput Reactions Screening and Optimization, Jason White, SRI (US)

Printed Functionalities
16:45 - 17:35

Temperature Control for Direct Thermal, Three Color, Single-Pass Imaging, Brian Busch, Zink Holdings (US)

How to Print a Rainbow, Susanne Klein, Carinna Parraman, and Louis Voges, University of the West of England (UK)

Inkjet Printing of 3D Optics for Individualized Illumination Systems, Erik Beckert, Falk Kemper, Sabrina-Jasmin Wolleb, and Maximilian Reif, Fraunhofer IOF, and Soenke Steenhusen, Fraunhofer ISC (Germany)


TRACK 3
Fundamental Science and Technology of Inkjet
10:10 - 17:55
 
Session sponsored by Xaar plc

Stable Inkjet Printed Lines at Ultra High Resolution (Focal), Jinxin Yang and Brian Derby, University of Manchester (UK)

Analysis Technology of Residual Solvent of Printed Inkjet Ink with Near-Infrared Spectroscopy, Eiichi Mori, Shunichi Oohara, and Tohru Ohshima, Ricoh Company, Ltd. (Japan)

Study on Ink-Jetted Droplet Volume Measurement Using Surface Energy Patterned Channels, Dong-Youn Shin, Pukyong National University (South Korea)

Mottle Evaluation of Coated Cardboards Printed in Inkjet, Sandra Rosalen and Johannes Backhaus, University of Wuppertal (Germany)

Quantification of Evaporation, Penetration and Viscosity Increasing Behaviors of Ink Droplets after Landing on Media, Yoshihiro Harada, Ricoh Company, Ltd. (Japan)

Fiber Morphology Analysis for Directed-Energy Deposition Manufacturing Process (Interactive Preview), Cailin Simpson and Ryan Hooper, Dynetics Technical Solutions, and Steve Simske, Colorado State University (US)

Effect of Ink, Substrate, and Target Line Width on the Line Quality Printed Using Dimatix DMP Inkjet (Interactive Preview), Mihir Choudhari, Robert Eller, and Christine Heusner, Rochester Institute of Technology (US)

Lifetime Improvement of Sol-gel PZT Thin Film Actuators: from Methodology to Reality (5601 Print Head) (Interactive Preview), Song Won Ko, Xaar (US), and Charalampos Fragkiadakis and Peter Mardilovich, Xaar plc (UK)

Simulation, Visualization, and Analysis of Drop Breakup and Coalescence in Ink Jet Printing and Drop Based Fabrication (Focal), Brayden Wagoner, Christopher Anthony, Pritish Kamat, Sumeet Thete, Vishrut Garg, Hansol Wee, and Osman Basaran, Purdue University (US)

Fundamentals of Thermal Inkjet Technology Micropumping and its Application for Printing and Life Science (Focal), Alexander Govyadinov, Erik Torniainen, Pavel Kornilovitch, and David Markel, HP Inc. (US)

Higher Order Meniscus Oscillations and their Effects on Droplet Formation, Frits Dijksman, University of Twente, and Paul C. Duineveld, Philips Consumer Lifestyle Technology Expert Group (the Netherlands)

Jetting Very High Viscosities with Piezo-Electric Drop-on-Demand Printheads for Increasing Capability of Photopolymer 3D Printing, Nick Jackson1, Wolfgang Voit2, Renzo Trip2, and Angus Condie1; 1Xaar plc (UK) and 2Xaar plc (Sweden)

Inkjet Waveform Optimization and Print Quality Analysis, Paul Best, ImageXpert (US)

Tuesday 1 October 2019 All Tracks IS&T Award Presentations and Tuesday Keynote
9:00 – 10:10

Application of Printed, Stretchable Electronics for Monitoring Brain Activities, Tsuyoshi Sekitani, Osaka University (Japan)

This keynote introduces the research and development of printed stretchable, ultra-flexible, and ultra-thin electronic devices—made mainly of functional organic materials—and brain activity monitoring systems using these developed devices. Specifically, it discusses a new type of brain activity monitoring system, Patch-EEG. Patch-EEG is a sheet-type brain-wave sensor system (patch brain-wave sensor) that can monitor brain waves simply by attaching the sensor to the forehead. The patch brain-wave sensor has a measurement accuracy comparable to that of large medical equipment. Because it can be attached to the forehead, it has been used not only in medical applications, but also applications such as the development of products using brain waves, measurement of the quality of sleep, monitoring of brain waves during sport activities, and easy monitoring of brain activities at home.

The talk discusses the process techniques for elaborately laminating nanomaterials on ultrathin or flexible thin rubber films developed in Professor Sekitani’s lab, and the research and development of ultraflexible and stretchable electronics using original techniques. The lab has succeeded in developing a system for monitoring biopotentials by combining (1) a flexible electrode with biocompatibility and high electric conductivity, (2) a flexible thin-film amplifier to amplify very weak biosignals, (3) a Si-LSI platform with a wireless communication function, and (4) a signal processing technique to visualize signals in real time. The sheet-type wireless system has a weight of less than 20 g and a thickness of less than 5 mm. Regardless of this small size, its measurement accuracy is as high as 0.1 μV and it can monitor very weak brain waves. In addition to Patch-EEG, a brain-implant brain-activity-monitoring sensor has also been developed. 

The keynote also addresses some of the remaining issues for printing technologies for next-generation bio-signal monitoring systems and outline the leading edge of brain monitoring using these systems and their future prospects. 

Tsuyoshi Sekitani received a PhD in applied physics from the University of Tokyo (2003) and joined the same university as an assistant professor; he became an associate professor in 2011. In 2014, Sekitani became a full professor at Osaka University; he received the Osaka University Distinguished Professor Award in 2017. He has received more than 40 awards including “Highly Cited Researchers” (The World’s Most Influential Scientific Minds) from Thomson Reuters & Clarivate Analytics in 2014 and 2018.


2019 exhibition
10:00 – 16:00
Conference Reception
17:00 – 19:00
Join other attendees at Cityscape Bar and Lounge, located on the 46th floor of the Hilton San Francisco Union Square (333 O'Farrell St.), which features unobstructed 360-degree views of the city skyline and Golden Gate Bridge.
TRACK 1
3D Printing Continued
10:10 - 17:10

Session sponsored by Ricoh. 

Large Scale Metal Additive Manufacturing— System Configuration, Materials, and Challenges (Focal), Yashwanth Kumar Bandari, Andrzej Nycz, Brian Gibson, Brad Richardson, Peeyush Nandwana, and Lonnie Love, Oak Ridge National Laboratory (US)

Calibration, Printing, and Post-machining Issues for Large-scale Metal Additive Manufacturing Components, Mark Noakes, Scott Smith, Bradley Richardson, and Andrzej Nycz, Oak Ridge National Laboratory (US)

Fabrication of Large-scale Ti-6AI-4V Structures using 3D Printing: Sensing, Control, and Automation, B. T. Gibson, B. K. Post, M. C. Borish, Y. K. Bandari, A. C. Roschli, B. S. Richardson, and L. J. Love, Oak Ridge National Laboratory; and A. Thornton and W. C. Henry, GKN Aerospace (US)

Design and Digital Fabrication of Magneto- dielectric Composites for Additive Manufacturing of Gradient Index RF Lenses, Khalid Masood1, Tatiana Zaikova2, Kenyon Plummer2, Thomas Allen3, James Stasiak4, James Hutchison2, Albrecht Jander1, and Pallavi Dhagat1; 1Oregon State University, 2University of Oregon, 3Voxtel, Inc., and 4Hewlett-Packard, Inc. (US)

3D Printing of Ethylcellulose Implants by Solvent Jetting, Mathieu Soutrenon, Fritz Bircher, and Edward Apebende, HES-SO (Switzerland)

3D Printing for Glass Casting (Interactive Preview), Claire Haley, Susanne Klein, and Tavs Jorgensen, University of the West of England (UK)

Printing the Muses: Reimaging Digital Musical Instruments through 2.5D Printing (Interactive Preview), Carinna Parraman and Benedict Gaster, University of the West of England (UK)

Digital Manufacturing: Enabling Automation, Speed to Market and Mass Customization (Interactive Preview), Avin Dhoble, Voxel8 Inc. (US)
Additive Manufacturing with Soft TPU: Thermal Properties for Printability and Adhesion Strength in Multimaterial Flexible Joints (Interactive Preview), Sebnem Özbek1, Conor Harris2, Willie Rochefort2, and Travis Walker1; 1South Dakota School of Mines and Technology and 2Oregon State University (US)

Surface Color Optimization of Powder-based 3D Objects based on Impregnation Process (Interactive Preview), Chen Chen, Shenzhen YUTO Packaging Technology Co., Ltd., and Wang Xiaochun, Chen Guangxue, and Yuan Jiangping, South China University of Technology (China)
Application of Attribute Information of Voxel-Based 3D Data Format FAV for Metamaterials Structure Design (Focal), Yuki Yokoyama, Naoki Hiji, and Tomonari Takahashi, Fuji Xerox Co., Ltd. (Japan)

Barcodes on Non-Flat Surfaces, Matthew Gaubatz and Robert Ulichney, Hewlett-Packard, Co. (US)

Multi Material Wire-arc Deposition using Metal Big Area Additive Manufacturing, Andrzej Nycz, Mark Noakes, Chris Masuo, Niyanth Sridharan, and Derek Vaughan, Oak Ridge National Laboratory (US)

Data Analysis Approach for Additive Manufacturing Print Quality, Koji Dan, Yasuaki Yorozu, Ryohsuke Nishi, and Takahisa Yoshigae, Ricoh Company, Ltd. (Japan)

Printed Smart Objects, Kent Evans and Steven Ready, Palo Alto Research Center (US)

JIST-FIRST The Effect of Sub-surface Structure on the Color Appearance of 3D Printed Objects, Matt Ronnenberg and Susan Farnand, Rochester Institute of Technology (US)

Visualization of Biomedical Products based on Paper-based Color 3D Printing, Jiangping Yuan, Ling Cai, Xiaochun Wang, and Guangxue Chen, South China University of Technology (China)

Track 2 Printed Electronics
10:10 – 16:10

Printed Electronics Integrated with Carbon Fiber Composites (Focal), Gerd Grau, Mohamad K. Idris, and Jiefeng Qiu, York University (Canada)

Micro-reactive Inkjet Printing of Conductive PEDOT:PSS Hydrogels, Mei Ying Teo, Logan Stuart, Kean C. Aw, and Jonathan Stringer, University of Auckland (New Zealand)

Sustainable Substrate for Printed Electronics, Liisa Hakola and Elina Jansson, VTT Technical Research Centre of Finland (Finland)

Printable 2D conductors Using Tailored Aqueous Dispersants for Wearable Electronics Applications, Joshua Moore, Fiona Porter, Aula Alwattar, Junru Zhang, Peter Quayle, and Stephen Yeates, University of Manchester (UK)

Image Based Quality Assurance of Fabricated Nitrate Sensor, Qingyu Yang, Yang Yan, Kerry Maize, Xin Jin, Hongjie Jiang, Muhammad Alam, Babak Ziaie, George Chiu, Ali Shakouri, and Jan Allebach, Purdue University (US)

Effect of Introducing Receptive Layer to Paper Substrate in Powder Electroluminescent Device (Interactive Preview), Naoki Takeda, Shota Tsuneyasu, and Toshifumi Satoh, Tokyo Polytechnic University (Japan)

Study on Preparation of Organometal Halide Perovskite Thin Film by Ink-jet Printing (Interactive Preview), Yingqun Qi, Beiqing Huang, Weimin Zhang, Zejun Lv, and Sunhao Guo, Beijing Institute of Graphic Communication (China)

Image-based Non-contact Conductivity Prediction for Inkjet Printed Electrodes (Focal), Yang Yan, Qingyu Yang, Kerry Maize, Jan Allebach, Ali Shakouri, and George Chiu, Purdue University (US)

The Development & Fabrication of the All Inkjet Printed Electronic Devices Using Novel Functional Materials Suitable for Various Sensing Applications in the Field of Printed and Flexible Electronic, Sunil Kapadia1, Marco Fritsch2, Ayala Kabla3, Franz Martin Fuchs4, Emanuel Bilbao5, Leandro Monsalve5, Julia Fossati6, Kalyan Yoti Mitra7, Askold Trul8, Elena Agina8, Sergey Ponomarenko8, and Reinhard. R. Baumann1; 1Technical University of Chemnitz (Germany), 2Fraunhofer Institute for Ceramic Technologies and Systems (IKTS) (Germany), 3PV Nano Cell Ltd. (Israel), 4Kerafol Keramische Folien GmbH (Germany), 5National Institute of Industrial Technology (INTI) (Argentina), 6Fundación Gutenberg (FGB) (Argentina), 7Fraunhofer Institute for Electronic Nano Systems ENAS (Germany), and 8Printeltech LLC (Russia)

Double Sided Electrodes Connection Based on Printing Method, Kye-Si Kwon1, Seong-jun Kim2, Jin-Sol Lee1, Seon-kun Park1, Jaeryul Yu1, and Md. Khalilur Rahman1; 1Soonchunhyang University and 2Samsung Electronics Co. Ltd. (South Korea)

Influence of Printing Parameters on Multiwall Carbon Nanotube (MWCNT) Sensors Fabrication and Performance, Tatiana Zubkova, Dhivakar Rajendran, Roshan Chandru, Jose Roberto Bautista-Quijano, Rajarajan Ramalingame, Olfa Kanoun, and Reinhard R. Baumann, Technische Universität Chemnitz (Germany)

Security Printing
16:10 – 17:00

3D Printed Object that can Record Information Inside it Rewritably, Piyarat Silapasuphakornwong1, Hideyuki Torii1, Masahiro Suzuki2, and Kazutake Uehira1; 1Kanagawa Institute of Technology and 2Tokiwa University (Japan)

Advances in the Decoding of Data-Bearing Halftone Images, Ziyi Zhao1, Robert Ulichney2, Matthew Gaubatz2, Stephen Pollard3, and Jan Allebach1; 1Purdue University (US), 2Hewlett-Packard Co. (US), and 3Hewlett-Packard Co. (UK)

Lightfastness of Invisible UV Fluorescence Inkjet Printing on Anticounterfeit Document (Interactive Preview), Juntira Komasatitaya, King Mongkut's University and Technology Thonburi (KMUTT) (Thailand)

Controllable Preparation of CMC/LaF₃:Eu³⁺ Composites and its Application in Anti-counterfeiting Film (Interactive Preview), Yuhan Zhong, Guangxue Chen, and Qing Wang, South China University of Technology (China)

Track 3 Fundamental Science and Technology of Inkjet
10:10 – 11:40
 
Session sponsored by Xaar plc

The Challenges of Precision in Direct-to-Shape Printing (Focal), Maria Cristina Rodriguez Rivero and Ronan Daly, University of Cambridge (UK)

Shear-mode Piezo Inkjet Head with Two Recirculating Pathss, Hikaru Hamano, Taishi Shimizu, Takuma Shibata, Yasuhiko Suetomi, Kazuki Hiejima, and Yusuke Kuramochi, Konica Minolta, Inc. (Japan)

Healthcare Applications
11:40 – 12:40

Detection, Imaging, and Quantification of DNA-based Pathogen based on Inkjet-Printed Test Strips, Min Zhao, Susana Amaya, Li-Kai Lin, Runzhe Zhang, Amanda Deering, Lia Stanciu, George T. Chiu, and Jan P. Allebach, Purdue University (US)

Paper-based Electrochemical Sensors: How to Converge Sustainable Electrochemical Sensors with Printing Techniques (Focal), Fabiana Arduini, Tor Vergata University (Italy)

Digital Packaging
12:40 - 15:10

Methods of Tracking Items throughout Automated High-Volume Single-Piece Print & Fabrication Operations, Mark Abramson, Printform Corporation (US)

Smart Packaging—How Smart are the Applications (Focal), Lutz Engisch, Leipzig University of Applied Sciences (Germany)

How the Printing Industry will Enable More Environmentally Friendly Packaging, Todd Fayne, PepsiCo (US)

Methods for Optimising Ink and Coatings for Packaging, Mark Bale, DoDxAct Ltd. (UK)

Late Breaking News
15:50 – 17:10
Wednesday 2 October 2019 All Tracks Wednesday Keynote
9:00 – 10:00

Fabricating Beauty: The Art and Science of Graphical 3D Printing, Philipp Urban, Fraunhofer Institute for Computer Graphics Research IGD (Germany)

Graphical 3D printing allows the reproduction of an object’s color, translucency or gloss in addition to its shape, boosting the design freedom in digital fabrication to tremendous heights. This talk starts with a survey of graphical 3D printing technologies, covers challenges and solutions of the digital workflow, and shows application areas in which graphical 3D printing technologies can disrupt whole industries or create new ones. At the end of the talk, I will show how graphical 3D printing changed movie making, taking as an example the stop-motion animation studio LAIKA and its latest feature film “Missing Link” for which 106,000 faces were printed for replacement animation.

Philipp Urban received his MS in mathematics from the University of Hamburg, Germany (1999), and PhD from Hamburg University of Technology, Germany (2005). From 2006 to 2008, he was a visiting scientist at Munsell Color Science Laboratory, Center for Imaging Science, Rochester Institute of Technology, USA, after which he headed the Color Research Group at the Institute of Printing Science and Technology, Technische Universität Darmstadt, Germany. Since 2013, Urban has been the head of the Competence Center 3D Printing Technology at  Fraunhofer Institute for Computer Graphics Research IGD in Darmstadt and works with his team on the graphical 3D printer driver “Cuttlefish”. He is an adjunct professor in the Norwegian Colour and Visual Computing Laboratory, Norwegian University of Science and Technology (NTNU) in Norway. His research interests include 3D printing, spectral imaging, image quality, and material appearance reproduction.


2019 exhibition
10:00 – 15:15
Interactive Paper Session/ Demonstrations/Exhibits/ Lunch Provided
13:30 – 15:15
TRACK 1

NEW FOR 2019

FRONTIERS IN IMAGING: Digital Printing for Fabrication
10:00 - 17:45

One-day Registration Available Where industry and academia meet to discuss current state-of-the-art and the pressing technology problems that need to be solved to advance the fabrication of products that make our work lives, health, and leisure better.

 Join colleagues for a full day of invited talks from international experts who look at specific applications in custom footwear, wearables for health monitoring, electrophoretic displays, flexible IoT devices, cybersecurity, and other spaces. The day includes the conference exhibition, the poster and demonstration session, and lunch

 
Welcome Remarks
, Scott Silence, Corning Inc. (US)

3D Printed Custom Footwear for Sports and Leisure, Amit Marathe, HP Inc. (US)

Printed and Hybrid Integrated Wearables for Health Monitoring, Liisa Hakola, VTT Technical Research Centre of Finland (Finland)

Interactive 3D-Printed Models for Students with Visual Impairments, Shiri Azenkot, Cornell University (US)

The Expanding World of Electrophoretic Displays, Michael D. McCreary, E Ink Corporation (US)

Advanced Printed Electronics Technologies for Flexible IoT Devices, Toshihide Kamata, National Institute of Advanced Industrial Science and Technology (AIST) (Japan)

IoTs: The Emerging Cybersecurity Challenge, Lindsey Hearst, HP Inc. (US)

Imaging and Printing in Dentistry, TBA, Carbon 3D (US)

Fabrication and AI, Chung-hui Kuo, Eastman Kodak Company (US)

Additional talks TBA, check website for program updates

TRACK 2 Legal Issues
10:00 – 10:40

Ink Jet—The Pioneers of the Nineteenth and Twentieth Centuries, Michael Willis, Pivotal Resources Limited (UK)

New Guidelines Issued by the U.S. Patent & Trademark Office on Patenting Computer-Implemented Inventions That Broadens Patent Eligibility By Restricting Abstract Idea Determinations, Michael Cornelison, Caesar Rivise, PC (US)

Standards and Standardization
10:40 – 12:20

Research on Color Reproduction Technology for Chinese Painting based on Multi-Spectral Imaging System, Maohai Lin, Meiqi Lin, and Guangyuan Wu, Qilu University of Technology (China)

Endpoint Criteria for Evaluation of Image Permanence of Photographic Prints, Hiroshi Ishizuka1, Evert Groen2, Yoshi Shibahara1, Shin Soejima1, and Nobuhiko Uchino1; 1FUJIFILM Corporation (Japan) and 2FUJIFILM Europe B. V. (the Netherlands)

Test Method of LED Light Stability for Photographic Prints, Hiroshi Ishizuka1, Evert Groen2, Yoshi Shibahara1, Shin Soejima1, and Nobuhiko Uchino1; 1FUJIFILM Corporation (Japan) and 2FUJIFILM Europe B.V. (the Netherlands)

JOINT Print4Fab / TDPF Session
Quality and Longevity Testing for Photographic Output
Session Chairs: Joe LaBarca, Pixel Preservation International (US) and Nobuyuki Nakayama, Fuji Xerox Co., Ltd. (Japan)
11:45 – 12:45

11:45  Subjective Image Quality Assessment Digitally Printed Images, Gaurav Sheth and Susan Farnand, Rochester Institute of Technology (US)

Smartphones have become ingrained in our daily activities, driving their cameras to become better with every generation. As more and more images are being taken by smartphones it has become increasingly important to assess the quality of the images taken by different phones. While many smartphone images are only viewed electronically, many images also get transformed into printed images, especially photobooks, as digital printing gets better and cheaper compared to traditional printing processes. The gap between electronic image and printed image is shrinking rapidly and it becomes important to study the transition of images from screen to paper. The main goal of this research was to perform a rank order experiment for assessing how smartphone image capture quality translates to printed images via several different digital printers. It was of interest to investigate whether the overall image quality on displays correlates well with printed image quality. The important aspect was to study was to observe if there is a loss of image quality depending on different digital printers,

12:05  Image Permanence of Photographic Prints under LED Lighting, Hiroshi Ishizuka1, Evert Groen2, Nobuhiko Uchino1, Yoshi Shibahara1, and Shin Soejima1; 1FUJIFILM Corporation (Japan) and 2FUJIFILM Europe B.V. (the Netherlands)

LED (Light Emitting Diode) lighting has been widely used as a major light source to illuminate photographic prints. However, the effects of LED lighting on image stability of prints are not clear. Light stability tests were carried out using some commercially available white LED lamps, and the fading behaviour was compared to the standardised Xe light testing, which simulates indirect sunlight indoors. It was clarified that fading under LED lighting is less than under Xe lighting, but it correlates well with Xe testing regarding the order of print materials in light stability. The effects of the correlated colour temperature (CCT) and the excitation wavelength of LED lamps were also studied. As a result, it has been confirmed that the dependence on the CCT is not significant, but LED lamps with shorter excitation wavelengths are more harmful to the light stability of photographic prints. Based on these results, a guideline for determining the standard test condition for LED light stability of photographic prints will be proposed.

12:25  Endpoint Criteria for Evaluation of Image Permanence of Photographic Prints, Hiroshi Ishizuka1, Evert Groen2, Nobuhiko Uchino1, Yoshi Shibahara1, Shin Soejima1, and Wil der Kinderen2; 1FUJIFILM Corporation (Japan) and 2FUJIFILM Europe B.V. (the Netherlands)

Light-fading tests were conducted for the several consumer and commercial photographic prints which were available in the current market. The print life of those photographic prints was evaluated subjectively using some sets of endpoint criteria, and also assessed visually by observers. It was confirmed that the evaluation based on the colour difference produced results that correlated well with those of the visual assessment.

Interactive Paper Session/ Demonstrations/Exhibits/ Lunch Provided
13:30 – 15:15
Materials and Technologies Enabling Quality Photo Products
Session Chair: Joseph LaBarca, Pixel Preservation International (US)
15:15 – 18:00

15:15  How AI is Actually Supporting the Photo Products Ordering, Reiner Fageth, CEWE Stiftung & Co. KGaA (Germany)

Finding the best images on the mobile phone between all the food porn and convenience photos makes the selection process even more time consuming than it was while changing from analogue to digital cameras.

In this paper we will describe how AI based evaluations such as object detection, face recognition, finding near duplicates and convenience images can be combined also with classical algorithms and heuristics to prove the user a compelling suggestion that he or she then can easily modify. The implementation is shown on mobile phones as well in desktop and online based photo ordering solutions. Also, a search function including these tasks will be presented in order to combine these features for finding relevant images or events to be placed, e.g. in a photobook for compelling story telling. The relevance of object and person detection will be proven while re-presenting (presented on Electronic Imaging 2019 in Burlingame) a manually made evaluation of images placed in CEWE photobooks but the first time brought into this AI based feature extraction context.

The paper will also address the demand for resolution enhancement for images downscaled by social apps such as Facebook or WhatsApp. Image samples will be evaluated and shown while being processed by GAN networks.

Finally we will present first attempts to combine these results with speech recognition in order to offer beside the keyboard, mouse and touchscreen another interaction possibility with digital systems while using spoken messages such as: “Present me a photobook with images from Lara and Nadine from the last holidays on Kos in Greece”. The near product-based usage of this technology is the CEWE Photo diary which will be presented as the actual use case. Text spoken will be analyzed and keywords are automatically extracted and images on linked online platforms are therefore analyzed and linked to a document containing the text and the images in a nice (of course printable) layout.

15:45  The Importance of Dark Keeping Factors in Determining Overall Image Permanence of Photographs—2019 Update with Pigment Inkjet, Patrick W. Webber, Kodak Alaris Inc. (US)

Traditional reporting of the image permanence of photographs has tended to primarily focus on light stability. The reality of how consumers use and store prints is that the vast majority of the print life is stored in the dark. The dark stability of traditional silver halide photographic paper was primarily driven by thermal affects. However many of the newer digital material used for photographic prints are susceptible to additional dark factors including humidity, and atmospheric pollutants can result in predicted life times being significantly shorter than reported by light stability data alone. This paper will review these additional dark factors and provide comparisons to traditional silver halide photographic paper and provide an update to the 2018 paper. Additionally the paper will include the dark factor impact on pigment inkjet on porous media photographic products.

16:15   Recent History of Kodak EKATCOLOR Papers—Enabling the Photo Fulfillment Industry, Joseph E. LaBarca, Pixel Preservation International (US)

The past 40 years of product development in Kodak EKATCOLOR papers has been a very interesting one. Many changes to the emulsion and imaging technologies were related to image quality, image permanence, and product performance for the photographic processing labs. Several required major changes to the processing chemistry to enable product improvements. Enabling the revolution of photographic printing technology from analog to digital was also a key driver of product changes over the past 20 years, seeing EKTACOLOR papers evolve from analog capability only, to both analog and digital capabilities. While changes to the emulsion and processing technologies may not be directly relevant to the professional finishing lab or the end consumer, their indirect benefits of production efficiencies and reduced costs are certainly beneficial. Changes to other technologies, including imaging and paper base technologies, have a direct impact. All together these improvements have enabled silver halide photographic paper in general, and EKTACOLOR papers in particular, to provide a high volume, high quality, and low cost printing solution in the digital photography age. Additionally, improvements leading to high longevity provide the end consumer with an optimal means for long term preservation of important events in their lives. This paper will review the product history of EKTACOLOR papers from 1975 to the present, and will include technology changes and the benefits they provided to both the photo fulfillment industry and end users. Full paper available on IS&T Digital Library.

16:45 – 17:00 Coffee Break

Stimulation of Printing via Instant Print Technologies
Session Chair: Joseph LaBarca, Pixel Preservation International (US)
17:00 – 17:45

Group Discussion: Stimulation of Printing via Instant Print Technologies

With the advent of digital photography, hardcopy output has dropped precipitously as it is no longer required to view images. A focused effort of TDPF has been to promote the value of hardcopy as a supplement to viewing images on screen. Now, with the growth of “portable pocket printers”, millennials are being exposed to hardcopy output, many for the first time. This discussion will focus on ways of leveraging these new printing technologies to expand output into premium, larger format, higher

Thursday October 3, 2019 Colleague Connections: (Optional) Technology Tours

times vary; additional fee required

  • FUJIFILM Dimatix, Inc., Santa Clara
  • HP Garage and HP Labs Research Center, Palo Alto
  • Jabil Blue Sky Center, San Jose

No content found

No content found

No content found

No content found

No content found

No content found

No content found